|
|
|
|
|
|
|
|
| |
 |
 |
|
|
|
 |
| |
 |
 |
Objective |
| Measuring
the ratio of material phases. |
|
Standard |
| ASTM
E562 |
|
Function |
①
Support multiple threshold ranges for setting
up various phases
② Add, delete, and rename for phases
③ Display All or part of phases
④ Display multiple threshold image
⑤ Various charts and data can be managed.
⑥ Report : output data to excel and report
designerW |
|
Table |
①
This table contains ratio of phases.
② Type of Phase
③ Analyzed Surface(%) - Ratio of each phase
computed percentage |
|
Output |
①
Display multiple threshold image
② Output Table and chart to report designer
or excel |
|
|
| |
 |
 |
|
Objective |
| Measuring
the nodularity and the size distribution of
nodular cast iron. |
|
Standard |
| ASTM
A247 |
|
Function |
①
Automatic binarization
② Data filtering : Circular filter, Area filter
③ Various charts and data can be managed.
④ Chart of the size distribution chart (A-247
table 1. Graphite Size)
⑤ Report : output data to excel and report
designer |
|
Table |
①
Area : area of segmented object
② Class : classification number based on area
of graphite
③ Circularity : Circularity of each graphite |
|
Statistics |
①
Field Area: Sqr mic.(Squre micron)
② Number of Fields.
③ Total Analysis Area: Sqr mic.(Squre micron)
④ Nodules per sqr mm.
⑤ Nodularity by Count. (%)
⑥ Nodularity by Area. (%) |
|
Output |
①
Display detected area of nodular graphite.
② Output Table, statistics and chart to report
designer or excel |
|
|
| |
 |
 |
|
Objective |
| Supports
measuring function for determination of the
microhardness of materials, the verification
of microhardness testing machines, and the
calibration of standardized test block |
|
Standard |
| ASTM
E384 |
|
Function |
①
Test method : Knoop and Vickers
② Automatic binarization
③ Area filter
④ Display table and statistics
⑤ Various charts and data can be managed.
⑥ Report : output data to excel and report
designer |
|
Data Table |
①
No. : Number of detected indentation.
② Area : Area Size of indentation.
③ Major length : Length of long diagonal.
④ Minor length : Length of short diagonal.
⑤ Hardness : The number obtained by dividing
the applied load in kilograms-force
by the projected area of
the indentation, computed from the measurement
of
the diagonal(s) of the
indentation. |
|
Statistics |
①
Field Area : Total size of field area.
② Minimum : Minimum value of hardness.
③ Maximum : Maximum value of hardness.
④ Mean : Mean value of hardness.
⑤ Std.Dev. : Standard deviation value of hardness. |
|
Output |
①
Display detected area of indentation.
② Output Table, statistics and chart to report
designer or excel |
|
|
| |
 |
 |
|
Objective |
| Supports
measuring function for local thickness of
metal and oxide coatings by the microscopical
examination of cross sections using an optical
microscope |
|
Standard |
| ASTM
B487 |
|
Function |
Automatic
binarization
Automatic detection of various angle of object
Area filter
Various charts and data can be managed.
Report : output data to excel and report designer
|
|
Data Table |
Bin
: Representative value for thickness data
distribution.
Count : Number of thickness for each bin.
Percentage : Value which transformed count
into percentage. |
|
Statistics |
Field
Area : Total size of field area.
Minimum : Minimum value of thickness.
Maximum : Maximum value of thickness.
Mean : Mean value of thickness.
Std.Dev. : Standard deviation value of thickness. |
|
Output |
①
Display detected area of thickness.
② Output Table, statistics and chart to report
designer or excel |
|
|
|
|
| |
|
|
GAIA
Blue
